G-CON Manufacturing Achieves ISO Standards in Management and Safety (December 2018)
Continuous Manufacturing Roundtable (October 2018)
The POD couple: Pall and G-CON team on modular cleanrooms (October 2018)
IPS and G-CON Launch iCON Cell Therapy Facility Platform (September 2018)
G-CON Manufacturing Announces Hiring of Chief Financial Officer (August 2018)
G-CON Manufacturing Receives the UL Listed Mark as a UL508A Panel Shop (July 2018)
G-CON Manufacturing Receives BVEDC’s Launch Award at Bryan Rotary Club Event (July 2018)
Collaboration Facilitates Continuous Manufacturing (June 2018)
Top Biopharmaceutical Executives Visit the Brazos Valley (May 2018)
GEN Roundup: Modular Proofs of Flexible Bioprocessing (May 2018)
G-CON Manufacturing Chosen for New POD® Based 503B Facility (May 2018)
iCON™ Product Portfolio Establishes Second Manufacturing Site in Kilkenny, Ireland (April 2018)
Pentec Health Selects G-CON Manufacturing POD for New Compounding Facility (April 2018)
The Turnkey Facility of the Future, Here Today – Are You iCON Ready (March 2018)
G-CON Manufacturing Awarded ISO 9001 Quality Standard Certification (December 2017)
Deployable Facilities Offer Pay As-You-Go Biomanufacturing Says Just (October 2017)
PCMM, The Next Generation, By Agnes Shanley PharmTech (September 2017)
G-CON Manufacturing and LifeAire Systems Announce Collaboration (September 2017)
Managing Mobility, Flexibility & Risk with Modular Design (Pharma's Almanac, June 2017)
G-CON Manufacturing CEO Receives Recognition as a Top Pharmaceutical Industry Influencer (May 2017)
G-CON, Butler and SPAN Virtual Reality Center Debuts at Interphex 2017 (March 2017)
Designing the Cell Therapy Facility of the Future (February 2017)
G-CON Announces the Completion and Delivery of a Custom Made POD® for Lonza, for Gene Therapy Manufacturing (December 2016)
G-CON Manufacturing Receives a Notice of Allowance for its Modular, Self-Contained Mobile Clean Room Patent Application (November 2016)
G-CON Manufacturing, Inc. Appoints Maik Jornitz as Chief Executive Officer (November 2016)
G-CON Manufacturing Announces Facility and Capacity Expansion (October 2016)
'Pop-Up' Factory: The Miniaturization of Medicine Manufacturing (Get Science, October 2016)
BioProcess International Announces Finalists for the 2016 BioProcess International Awards (September 2016)
Design, and Engineering - Flexibility Takes Center Stage (Pharmaceutical Technology, June 2016)
FOYA Supplement (Pharmaceutical Engineering, May 2016)
Evaluating the Benefits of Prefabricated Cleanroom Infrastructure Designs and Costs (Pharmaceutical Engineering, May 2016)
G-CON Manufacturing and AES Clean Technology Announce Collaboration on Future Cleanroom Projects (April (2016)
Continuity Promotes Bioprocessing Intensity (April 2016)
2016 Facility of the Year Category Winner for Equipment Innovation (February 2016)
Pfizer Announces Collaboration with GSK on Next-Generation Design of Portable, Continuous, Miniature and Modular (PCMM) Oral Solid Dose Development and Manufacturing Units (October 2015)
Giving a Boost to the Facility of the Future (PharmTech.com, October 2015)
UTHSC Files Permit for Drug Manufactuirng Facility (Memphis Business Journal, August 2015)
A Review of Aging Process and Facilities Topic (PDA Journal, August 2015)
Inside Pfizer's Modular Manufacturing PODs (Pharmaceutical Online, July 2015)
G-CON Manufacturing Launches Their 2nd Generation Cell Therapy Cleanroom POD (July 2015)
G-CON Manufactuirng Selected to Supply ISO 7
Flexible Facilities Roundtable (American Pharmaceutical Review, June 2015)
Pfizers's Continuous Manufacturing POD Comes in for a Landing (Pharmaceutical Manufacturing, June 2015)
Prefabricated Cleanroom PODs Speed Up Installation & Enable Repurposing (Controlled Environments, May 2015)
Cleanroom and Facility Planning: Getting Beyond Cost Per Square Foot (Pharmaceutical Technology, May 2015)
Modular Manufacturing Platforms for Biologics (BioPharm International, May 2015)
Aging Facilities: Aseptic Manufacturing Faces the Future (Pharmaceutical Online, May 2015)
G-CON Manufacturing's President Receives Prestigious Pharmaceutical Science Award (April 2015)
G-CON to Build Aseptic Formulation and Filling PODs for University of Tennessee (Cleanroom Technology, March 2015)
PaxVax's Cholera Vaccine Trial Meets Phase III Goals (Pharmaceutical Processing, December 2014)
Continuous Solid Dosage Manufacturing Platform Nears Prototype Installation (Pharmaceutical Technology, November 2014)
Pfizer Hails Portable Manufacturing as Latest in Lean (in-Pharma Technologist, November 2014)
Aging Facilities: Retro or Build New (Life Science Leader Magazine, October 2014)
Modularity Creates Flexible Manufacturing Systems (PharmTech, September 2014)
The Call for Agile, Flexible Facilities (Pharmaceutical Processing, August 2014)
Pfizer Investment an Endorsement of 'Podular' Manufacturing (in-Pharma Technologist July 2014)
PODs in Puerto Rico: G-CON Manufacturing Now Represented Beyond U.S. Borders (Caribbean Business, May 2014)
"Podified" Manufacturing Facilities and Risk Mitigation of Aging Pharmaceutical Facilities (Pharmaceutical Online, April 2014)
Facilities of the future: Innovation, Standardisation and Modularisation (BioPharma Asia, March 2014)
Podular Manufacturing to Become Facility Norm within 5 Years (in-Pharma Technologist, March 2014)
Caliber, a Podified Facility, Recognized for Excellence in Technology (Pharmaceutical Processing, March 2014)
Pfizer Collaboration Prepares for the Future of Flexible Manufacturing (Pharmaceutical Online, November 2013)
When Reliance Becomes Uber-Reliance (PharmaEvolution, October 2013)
G-CON and Rockwell Deliver Autonomous, Flexible Environments for Pharmaceutical Facilities (Rockwell, August 2013)
Hort Americas and G-CON Give a New Way to Prove Idea Without Going Broke (Hort Americas, July 2013)
Cleanroom Construction: Materials Matter (PharmaEvlolution, July 2013)
The Need for Flexible Facility Designs (Pharmaceutical Online, 2013)
The Importance of Scaling Single-Use Equipment (Bioresearch Online, April 2013)
Facilities of the Future (Pharmaceutical Manufacturing, April 2013)
G-CON Partners with UK's Howorth Air Technology to Offer Single-Source GMP Solutions (Bionews TX, March 2013)
Integration of Single-Use Platform Process within an Innovative Facility Design (Biopharm International, November 2012)
G-CON POD Named as 2012 Pharmaceutical Innovations Honoree (Cleanroom Technology, July 2012)
